
                             README.TXT File
    README file for OMNIKEY CardMan 5x21/5x25, Version 1.1.1.5
               Copyright (c) 2000 - 2006 OMNIKEY

This document describes the release notes of the OMNIKEY CardMan 5x21/5x25 Driver
=================================================================================



I. General
**********


Supported Operating Systems:
----------------------------

This driver supports the operating systems
Windows 2000
Windows XP
Windows Server 2003

The installation of the driver is done by Plug and Play under all operating systems.


II. New Installation:
*********************

Plug the OMNIKEY CardMan 5x21/5x25 into a free USB port.

A 'New Hardware Found' dialog box will appear and you will be asked to select the
directory where the driver files are stored.

During driver installation the CardMan Diagnostic Tool will be installed. This tool is
listed in the control panel and displays version and status information.

You can remove the CardMan Diagnostic Tool by deleting the following files:
cmdiag.cpl
cmdiag.ini
cmabout.dll
cmabout.ini
ok.bmp

Please find these files in the SYSTEM directory under Windows 98 and ME,
in the SYSTEM32 directory under W2000 and XP.




MS Smart Card Base Components
-----------------------------

The OMNIKEY CardMan 5x21/5x25 needs the Microsoft Smartcard Base Components for proper
operation.

If you have accidentally installed the old Base Components under Windows 2000 or XP, you
can recover the smartcard subsystem with the following commands on an
administrator's console window:

Regsvr32 %windir%\system32\scardssp.dll
Scardsvr reinstall

Note: Only for Windows XP you must additionally create a .reg file.
      DO NOT TRY THIS UNDER W2000 !

      To create this file do the following:

      a) Open an editor (e. g. Notepad)

      b) Type in the text as listed below:

		Windows Registry Editor Version 5.00

		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SCardSvr]
		"ObjectName"="NT AUTHORITY\\LocalService"

		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SCardDrv]
		"ObjectName"="NT AUTHORITY\\LocalService"


      c) Click on 'File' --> 'Save as', choose a directory and name the file
         (e. g. 'Scard_xp.reg'.
         Note: It's necessary that the file extension is '.reg'!),
         click on 'Save'
      d) Open Windows Explorer change to the directory where you have stored the
         *.reg file and doubleclick the file.
      e) Reboot your computer.
      f) Open an administrator's console window again and type in:

         net start scardsvr

	 to start the Smartcard services manually.



III. Updating:
**************

Step By Step Instructions To Update The Driver:
-------------------------------------------------------------------

The newest driver versions are always available under http://www.omnikey.com.

The files on this web page are selfextracting archives, which are extracted by
doubleclicking the downloaded .exe file. Please keep the directory structure
for extraction.


Step 1:
-------

Download the drivers for your CardMan from http://www.omnikey.com.

Change to the directory where you have stored the downloaded file.

Doubleclick on the downloaded .exe file.

When you are asked, where to unpack the files, choose a directory to expand the
files to (e. g. c:\drivers\CardMan\).



Step 2:
-------

Windows 2000:
-------------

Click on 'Start' --> 'Settings' --> 'Control Panel', doubleclick on the System-
icon, the 'System Properties window' appears.
Click on the 'Hardware' Tab-Sheet and then click on the 'Device Manager' button
in the middle of the window.

Click on the '+'-sign on the left side of the 'Smart Card Readers' entry to
display all installed smart card readers.
Then click on the 'CardMan xxxx' entry with the right mouse button and click on
the 'Properties' entry in the appearing context menue.

Click on the 'Driver' Tab-Sheet and then click on the 'Update Driver' button.
The 'Upgrade Device Driver Wizard' window appears, click 'Next' to continue.

Select 'Display a list ....' and click 'Next'.
Click on the 'Have Disk...' button. In the 'Install From Disk' window click on
the 'Browse' button and select the '*.inf' file in the directory where you have
unpacked the downloaded file and click 'Open'.

Verify that the correct path to the file is shown in the 'Copy manufacturer's
files from:' window and click 'OK'. A message is shown that the wizard is ready
to install the driver for the shown hardware device. Click 'Next'.

A window may appear that the chosen driver is not digitally signed, you will be
asked if you want to continue the installation. Click on the 'Yes' button.

After Windows has copied the driver files a message appears that windows has
finished installing the software. Click on the 'Finish' button and close all the
windows you don't need.

Now the CardMan is ready for use, because under Windows 2000 it is not necessary
to reboot the computer.


Windows XP:
-----------

Click on 'Start' --> 'Settings' --> 'Control Panel', doubleclick on the 'System'-
icon, the 'System Properties' window appears.
Click on the 'Hardware' Tab-Sheet and then click on the 'Device Manager'.

Click on the '+'-sign on the left side of the Smart Card Readers-entry to dis-
play all installed smart card readers.
Then click on the 'CardMan xxxx' entry with the right mouse button and click on
the 'Update Driver' entry in the appearing context menue.

The 'Hardware Update Wizard' window appears, select 'Display a list ... I can
choose a specific driver' and click 'Next' to continue.

Select 'Choose a specific driver' and click 'Next'. Click on the 'Have Disk...'
button.

In the 'Install From Disk' window click on the 'Browse' button and select the
'*.inf' file in the directory where you have unpacked the downloaded file and
click 'Open'.

Verify that the correct path to the file is shown in the 'Copy manufacturer's
files from:' window and click 'OK'. Click 'Next'.
A message is shown that the driver didn't pass the Windows Logo Test confirm
the message by clicking on the 'Continue Installation' button.

After Windows has copied the driver files a message appears that the software
for the listed device has been installed. Click on the 'Finish' button and close
all the windows which are not needed anymore.

Now the CardMan is ready for use, because under Windows XP it is not necessary
to reboot the computer.

IV. FCC Information:
********************
CardMan 5121, 5321 and 5125 are certified according to the FCC standard. The user must not modify reader because
otherwise the FCC certification is not valid any longer.
IMPORTANT SAFETY INSTRUCTION! CAUTION - USE THIS DEVICE ONLY WITH LISTED PERSONAL COMPUTERS

V. What is new in this release ?
*********************************
- seperate driver packages for Windows Me and older systems
- registry value to stop contactless card tracking when contact card powered 
- bug fix for contacless card tracking after standby & hibernate 


Release date: 01/05/2007

-------------------------------- END OF FILE -------------------------------
