                           Celerity FC Adapter
                       Windows Vista Installation
                       --------------------------


NOTE:   If you already have one or more Celerity FC adapters
        installed and you are installing additional adapter(s),
        you do NOT need to perform any of these procedures
        unless you are updating a previously installed driver.

	You must have system administrator privileges to perform driver
	installation.

--------
Contents
--------

A.  Upgrading your Celerity FC Windows driver

B.  Adding a Celerity FC adapter to an existing Windows installation.

C.  Installing a fresh copy of Windows onto a disk attached to
    the Celerity FC adapter.

D.  Creating Celerity FC installation media

-----------------------------------------------------------------------------
A.  Upgrading your Celerity FC Windows driver
-----------------------------------------------------------------------------

    1.  Insert your Celerity FC Installation Disk and run Setup.exe.  If you
	have User Account Control enabled, you will be prompted to grant the
	installer permission to continue.  If you do not have administrator
        privileges, you will also be prompted for an administrator username
        and password.  Click the 'Continue' button.  The driver installer 
        will launch.

    2.  Click 'Install' to install the Celerity FC driver and complete the 
        installation.  You will receive a Windows security prompt to confirm 
        that you want to install the driver.  Click 'Install'.  If you 
        select 'Always trust software from ATTO Technology, Inc.', you will 
        not receive this prompt in the future.
        
    NOTE:
        The Celerity FC Installation Disk is either the Installation CD 
        shipped with your adapter or a directory containing the latest driver 
        that was downloaded and expanded.
        
        If you are using the Installation CD, it will automatically start 
        when inserted in Windows. The on-screen instructions will provide a 
        mechanism to install the driver.  Otherwise, navigate to the 
        directory containing Setup.exe.

-----------------------------------------------------------------------------
B.  Adding a Celerity FC adapter to an existing Windows installation.
-----------------------------------------------------------------------------

    NOTE:
        It is recommended that you complete this installation procedure
        before attaching any devices to the adapter.

    1.  Perform the installation procedure in (A) to pre-install the
        Celerity FC driver.  Shutdown Windows when Setup prompts you
        to do so.

    2.  Install your Celerity FC adapter into an available PCI expansion
        slot.

    3.  Restart Windows.  Windows should detect your Celerity FC adapter
        and install the driver automatically.

    4.  Shutdown the system and setup the final adapter configuration.
    
        a.  If the Celerity FC adapter is replacing another adapter in the
            system, disconnect the cables from the adapter and remove 
            the adapter from the system.  Optionally, you can move the 
            Celerity FC adapter to the PCI slot that the previous adapter 
            occupied if this slot is more suitable for the Celerity FC 
            adapter.

        b.  Attach the appropriate cables to the Celerity FC adapter.
        
        c.  Close the computer chassis, turn on the power and restart 
            Windows.

-----------------------------------------------------------------------------
C.  Installing a fresh copy of Windows onto a disk attached to the
    Celerity FC adapter.
-----------------------------------------------------------------------------

    1.  Start Windows setup as per the instructions provided with Windows.
	Select a custom installation and proceed to the 'Where do you want
        to install Windows?' window.

    2.  Click 'Load Driver'.  Insert media containing the Celerity FC 
        driver package and click 'OK'.  

    3.  Windows Setup will search for drivers matching devices in your system.
        If the Celerity FC adapter is not listed in the 'Select the driver 
        to be installed.' list, click 'Browse' and locate the driver.  Select
        the Celerity FC adapter from the list and click 'Next' to install the
        driver.

    4.  You will now be back at the 'Where do you want to install Windows?' 
        window and your SCSI devices should be listed.  You may remove the
        Celerity FC installation media.  Configure and select a partition 
        for installing Windows.  Click 'Next'.

    5.  Finish Windows installation as per the instructions provided with 
        Windows.

    NOTE:   
        When Windows begins copying files to your hard disk, you will again
        be prompted to insert the Celerity FC installation disk
        (and any other vendor-supplied disks you used during custom
        installation).  This is normal.  The first time you inserted
        the disks, Windows only loaded the drivers into memory; the second
        time you insert the disk(s), Windows is copying the driver to your
        hard disk.

-----------------------------------------------------------------------------
D.  Creating Celerity FC installation media.
-----------------------------------------------------------------------------

    The Celerity FC Installation CD may be used for procedure (C).
    Other types of installation media such as a floppy disk or USB flash 
    drive may be created using the following procedures.

    To create installation media from the Celerity FC Installation CD:
    
        1.  Insert the Installation CD into a CD or DVD drive and the 
            installation will automatically start.  If the Celerity FC 
            installation does not start, navigate to the root of the CD 
            and run 'autorun.bat'.
    
        2.  Select your adapter and "Windows Drivers" from the items on the 
            left side of the screen.
    
        3.  Select the appropriate CPU based operating system from operating 
            system choices.
    
        4.  Select "Create Scsiport Driver Diskette" for the desired 
            operating system.
    
        5.  Follow the instructions for creating the installation media.
    
    
    To create installation media from a Celerity FC driver download from the 
    ATTO Technology website:
    
        1.  Download the latest driver software from the ATTO Technology 
            website.
    
        2.  The download is a self-extracting executable that expands the
            driver software package.  Run the self-extracting executable and 
            select a folder to place the expanded software package.

        3.  Navigate to the expanded software package.  The Celerity FC 
            Windows driver is located in the base directory.

        4.  Run "makedisk.exe" and follow the instructions for creating
            the installation media.

